This product is currently not available for purchase
Key Features
- Carl Martin Single Channel AC-Tone Effects Pedal
- Level, Drive & Tone Controls
- Bypass with Active Buffered Output
- Perfect For Smaller Pedal-Boards
- 9V Regulated Power Supply
Carl Martin Single Channel AC-Tone Pedal Overview
The Carl Martin Single Channel AC-Tone Guitar Effects Pedal has the same tone as the Pro-Series AC-Tone but in a smaller, pedal-board friendly package. It features three knobs and one switch and has a slightly beefed-up Gain section. The DC-DC converter circuitry means the pedal can be powered by a regulated 9V power supply but will still operate on the same 12V level as the original AC powered AC-Tone.
Product Ref: 32427
Full Description
View Full DescriptionSingle Channel AC-Tone
The single channel AC-Tone has three control knobs: Level, Drive and Tone. The Level knob adjusts the overall level of the pedal, so you can match or exceed the bypass signal for rhythm or solo work. The Drive knob adjusts the amount of overdrive, from light crunch to full, fat overdrive with loads of sustain, giving you tones that cut right through the mix in live and recording sessions. The Tone knob is a high cut filter, allowing you to filter out the high frequencies and fine tune your tone regardless of which guitar/pickup you are using.
Bypass Footswitch
The pedal's Bypass button, which switches the effect on and off, is active buffered output to ensure you don't lose any signal in long cables across the stage.
Specifications
- Input: 1M Ohm
- Output: 200 Ohm
- S/N Ratio: 58 dB
- Power Supply: 9V DC (not included)
| Reviews of our service
Showing our latest reviews
View all
View all
×
Oops! There was an error retrieving our TrustPilot reviews. Please, try again later.
