DISC QSC PLX3602 Professional Power Amplifier

Full Description

The PLX3602 is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required. The PLX3602 features built-in subwoofer processing, filter switches, and front panel indications of bridge mono status.

Stereo Mode (both channels driven)

• 8 ohm FTC 20 Hz - 20 kHz 0.05% THD: 725 W
• 8 ohm EIA 1 kHz 0.1% THD: 775 W
• 4 ohm FTC 20 Hz - 20 kHz 0.05% THD: 1100 W
• 4 ohm EIA 1 kHz 0.1% THD: 1250 W
• 2 ohm EIA 1 kHz 1% THD: 1800 W

Bridge Mono Mode

• 8 ohm 20 Hz - 20 kHz 0.1% THD: 2500 W
• 8 ohm EIA 1 kHz 0.1% THD: 2600 W
• 4 ohm 1 kHz 1% THD: 3600 W

Signal rating

• Signal to Noise (20 Hz - 20 kHz): -107 dB
• Input Sensitivity at 8 ohm: 1.25 Vrms
• Voltage Gain at 8 ohm: 36 dB
• Output Circuitry: 2-Step Class H
• Power Requirements (1/8 power, pink noise at 4 ohm): 11.5A/120V
• Distortion (SMPTE-IM): < 0.02%
• Damping Factor: > 500
• Input Impedance: 10k ohms unbalanced / 20k ohms balanced
• Input Clipping: 11 Vrms (+21 dBu)
• Cooling: Variable-speed fan, rear-to-front air flow
• Input Connectors, each channel: 3-pin XLR and 1/4" TRS balanced, parallel
• Output Connectors, each channel: Neutrik NL4 Speakon and touch-proof binding posts / Both channels available on Ch 1 NL4 connector
• Amplifier Protection: Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection. Stable into reactive or mismatched loads.
• Load Protection: On/off muting, DC-fault power supply shutdown